The GTAG5 AIR-GUARD®Kit is designed to fit into both new and existing non standard cut outs using brush seal technology.
As with all Air-Guard products brushes are designed to overlap offering a better air seal. The brush can be cut as required to fit any custom floor cutout size.
The kit is easy to install with a factory applied adhesive strip to the back of both brush sections. The engineered side rails integrate with the brush sections.
The side rails are cut as required and screw fixed into position to form a complete edge seal.
There are 2 kit sizes to select from:
Sealing around under-floor air cooled cable openings offers the following benefits:
As with all Air-Guard products brushes are designed to overlap offering a better air seal. The brush can be cut as required to fit any custom floor cutout size.
The kit is easy to install with a factory applied adhesive strip to the back of both brush sections. The engineered side rails integrate with the brush sections.
The side rails are cut as required and screw fixed into position to form a complete edge seal.
There are 2 kit sizes to select from:
- GTAG5-300 – Maximum Dimension 312mm x 225mm.
- GTAG5-600 - Maximum Dimension 612mm x 225mm by pass air.
Sealing around under-floor air cooled cable openings offers the following benefits:
- Reduced air-loss and increased static press for under-floor air installations.
- Improved cooling efficiencies and extended cooling equipment life.
- Reduced cooling plant running costs.
- Facilitates Cold/ Hot Aisle best practice.
- Seals cable openings to prevent under-floor contamination.
Comments
Post a Comment